Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How are mounted door seals of the refrigerator ?

Waiting for a better solution How are mounted door seals of the refrigerator ?

Forum-> Home Appliance Repair
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 30 Nov 2010 7:28 
Hello, I want
replace door seals on my refrigerator freezer model brand Indesit CG 1385 W U.S..
I found references on the net joints but they are glued or clipped?
If they are stuck it is doable, but if they are clipped how shall you one?
Thanks for your help
Guest





PostPosted: 30 Nov 2010 9:43 
GOOD EVENING
all depends on the joint model:
1/Joint "sole": This seal consists of a flat magnet , a bellows and a special profile for fixing the door-cons. The flat bottom, said flange is slipped behind the door-cons. The screws attaching the door-cons across the sole joint.
2/LE "joint heel": This type of joint differs from the previous profile shaped heel of the party providing the fixation.Le bead heel stuck in the trough of the cons-porte.Les screws of the door-cons do not break the seal. To disassemble the joint, simply release the screws.
3/The joint box: In this joint model, the screws are not used to maintain the magnetic seal.

The bottom part is shaped like an arrow and it fits into the groove provided for this purpose in the cons-porte.Ce type of seal is not wide spread: it is too bad because the alternative is more facile.Cordialement Jean-Paul
Guest





PostPosted: 30 Nov 2010 9:51 
Thank you for accurate information.
Seeing no screws securing the door cons, I guess being in Case No. 3 of a joint embedded in a groove. I dare not shot too I think he is also stuck.
Regards
Guest





PostPosted: 30 Nov 2010 10:55 
GOOD EVENING
Once you will defeat the former, you're going to realize, and only those that you will be sure of her pose, and its implementation place.Cordialement Jean-Paul
Guest





PostPosted: 30 Nov 2010 12:29 
Hello, already ordered joints that are under the original references for the fridge and C00048559 C00048558 the freezer. normally they are attached magnetic
Guest





PostPosted: 30 Nov 2010 12:55 
HELLO
seal insert, is the model 3 and magnetic I évoqué.Cordialement jean-Paul
Guest





PostPosted: 30 Nov 2010 13:55 
Hello, what are the references I found also.
If these joints are magnetic and built it should not be difficult to replace!

I will order them, I'll see if I encounter a difficulty for the removal and installation.
In the meantime if you have any tips for how to implement I'm interested.
Regards
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Home Appliance Repair All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


How to disassemble a door on a refrigerator ?
How to change a door seal of refrigerator ?
How to reverse door refrigerator freezer heading ?
How to remove the banner Sharp 4-door refrigerator ?
Where to find websites on the appliance ?
How to repair my LG refrigerator ?
How to repair a refrigerator that was lying ?
How to repair my refrigerator does not cool ?
How to repair a refrigerator absorption ?
How to repair a refrigerator 2 doors down ?
How to repair my refrigerator rc2660 heading down ?
How to repair my refrigerator Samsung SRS 2028C ?
How to repair my refrigerator cold ARC 4020 ?
How to repair my refrigerator brand Faure ?
How to repair refrigerator that cools more Siera ?

Links suggested by Google