Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How Envel rusty nails on a beam former ?

A solution has been found How Envel rusty nails on a beam former ?

Forum-> Miscellaneous (DIY & Works)
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 06 Dec 2010 4:02 
hello voila j ai formwork girders and there is all the little nails that held the slats plastering
impossible to remove with pliers they are too rusty
how to separate the shear
thank you for advance for the answers
Guest





PostPosted: 06 Dec 2010 4:48 
HELLO
you do this you must use a diesel, or lemon + salt, several ecological but also result will not be immediate, not too sure, so you have more than the first process to complete your problème.Cordialement Jean-Paul
Guest





PostPosted: 06 Dec 2010 6:52 
goodnight
heated at torch rather quickly and the end of the nail that sticks out.
Do not burn the wood surface but warm enough for the heat travels along the nail. Then the pincers and arms do the rest.

Good grub
Guest





PostPosted: 06 Dec 2010 8:02 
Cette réponse a aidé l'auteur du sujet.
Hello,


Alternatively, if the past were not working, I used:
you cut what you can to more flush with a hacksaw to get a flat part, and you drive the nail into the wood (1 or 2 mm is sufficient)
Then you plug with wood filler the same color.
A wax and blow it invisible.
acid To ++
Guest





PostPosted: 06 Dec 2010 9:42 
thank you for the info I'll try
good day
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Miscellaneous (DIY & Works) All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


How do a flip on the beam ?

Links suggested by Google