Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How to change a mouth extraction VMC ?

Waiting for a better solution How to change a mouth extraction VMC ?

Forum-> Do It Yourself
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 30 Nov 2010 11:48 
Hello,

How to change a headline trident located in the ceiling whose mouth extraction is broken (clips slipcase) and not the same diameter as those sold now?

I currently have:
to the bathroom and toilet, a diameter of 7.5 cm.
For the kitchen, it is 11.5 cm.

Thanks for everything, cordially
Guest





PostPosted: 30 Nov 2010 11:57 
Cette réponse a aidé l'auteur du sujet.
Good evening

there are different diameter sleeves in one piece
or make the correct diameter with tape adhéssif.

has +
Guest





PostPosted: 30 Nov 2010 12:54 
Thanks, but I want to know how to remove this cuff tear without trident, tearing the plasterboard ceiling plate otherwise it will take me learn to redo the ceiling.
Thank you
Guest





PostPosted: 30 Nov 2010 14:17 
Cette réponse a aidé l'auteur du sujet.
Good evening, we must retract the hooks to the inside and pull out
Guest





PostPosted: 30 Nov 2010 16:00 
Bonjour,
Je vais suivre vos indications.

Pour la suite, vous serait-il possible de me dire comment découper proprement la plaque placo du plafond en cercle pour introduire de nouveaux manchons qui sont vendus en diamètres supérieurs (80 - 100 - 125 mm) à ceux actuels (75 - 115 mm) ? Quel outil utiliser ?

Merci bien.
Guest





PostPosted: 30 Nov 2010 17:12 
Cette réponse a aidé l'auteur du sujet.
Hello, use a jigsaw. To insert the blade into the plasterboard made a hole with a perçeuse.Avec a compass, draw a circle diamètre.Si you do not have a jigsaw, you can take a handsaw blade close
Guest





PostPosted: 30 Nov 2010 18:01 
Cette réponse a aidé l'auteur du sujet.
Good evening, then take a grater or wood (half round) before actually making the plot forward, but slightly smaller than the diameter of the piece.

good luck and thank you for your answer
Guest





PostPosted: 30 Nov 2010 19:03 
Cette réponse a aidé l'auteur du sujet.
Goodnight

if I understood everything, you want to put a mouth larger in diameter replace another.

so the idea of the compass.. or plant the tip?

take your new headline, apply in reverse of what it should be.
with pencil has drawn inside the mouth.
the jigsaw is fine, but that is bcp dust.
for my part I take a hacksaw blade and it's going very well.
when you cut you think has put 1 or 2 mm at the exterior of your hole, so your headline correctly
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Do It Yourself All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


Links suggested by Google