Bonjour à tous,

Le site Savoir Tout Faire va fermer le 21 août.

Pour poser vos questions aux membres de la communauté et retrouver plein d'astuces, n'hésitez pas à vous rendre désormais sur Linternaute.com, et notamment sur ses forums Bricolage et Auto. Vous y trouverez forcément la réponse à vos questions.

A bientôt !

La Rédaction

Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How to change an oil seal on Ford Transit ?

A solution has been found How to change an oil seal on Ford Transit ?

Forum-> Mechanics
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 18 Dec 2010 12:43 
Hello,

is my problem, I have an old Transit 1992, diesel engine exchange standart 2 years ago, it roule.au last roadworthiness I learned that the rear brakes are not balanced, the mechanic tells me that it is the oil that pours deck on the rear brakes, and it's going to be expensive. Increasingly, it's the holidays, and I must wait until September!
off, I'm artiste.et I shows to do, and my old Ford is essential..
so here's my question:
1/how to change or renew the oil bridge, to avoid the worst, in the meantime, if I can not find the solution for brakes,
2/is it possible without special equipment to do the repair myself? I hear about seal. and change the brakes because of the oil.
thank you in advance !
Guest





PostPosted: 18 Dec 2010 13:34 
Hello
I do not see too much oil seal what you were talking.

To the rear brake lining, it may be true that he will have to change:
dint of braking with brake fluid everywhere, the liquid enters the pores of trim and AC "ice".
Some fun to catch up by sanding and grooving, to see.

For the oil bridge, we will have to level but first solve the leakage problem.
If the leak just the drain plug then a few leg will be joined the case or change the copper seal (I believe) with a new purchase in store.
If that is all the jar, so do the leaking drain, remove the jar (single) and a little paw gasket and reassemble.

For it is oil or oil 90W100 something like that in any case high numbers, it is oil and box bridge, it is in the business.

Here, start by setting the leak and test, maybe he will not be necessary to change the brakes.
Hoping you out.
Guest





PostPosted: 18 Dec 2010 14:17 
In my opinion, since he bought Pickup Truck :-)
Guest





PostPosted: 18 Dec 2010 15:23 
re.
Bennnnnnnnnnnn.. it had never happened before.
Where are these missing posts? On the WIKI ?
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Mechanics All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


Can I change my spheres of C5 alone ?
How to change the rolling my R19 ?
How to change glow plugs (R19) ?
How to change the heater core of an R5 ?
How to change cup shock Passat 1991 ?
What should change with the belt distrib. Megane II ?
How to change the intake manifold or EGR Audi A3 ?
How to change air compressor electric heat ?
How to change the timing belt on Berlingo ?
How to change a throttle cable Quad Kymco 250 KXR ?
How to change the window lift Nissan Primera ?

Links suggested by Google