Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How to connect a piece socket and switch ?

Waiting for a better solution How to connect a piece socket and switch ?

Forum-> Electricity
Post new topicReply to topic
View previous topic :: View next topic  
Author Message

PostPosted: 03 Dec 2010 0:44 
Hello heads/all
How do I connect my piece?
I would like to connect a piece, plug + switch in the garden shed, but am not very bright with electricity, qq1 could tell me how to make connections of one to another, and toward the light please?
Thank you

PostPosted: 03 Dec 2010 2:16 

you should already know that you do not have the right (standard) to connect your PC and light on one line.

So you need two separate lines, one in 1.5 mm ² for light and one 2.5 mm ² for the catch.

for light you must use a protection of 10 A and a catch of 16 A...
2: Hello, I'm
no mention of pc?

My request is for just the fitting of the son of the piece between them, so as not to disconnect power from the wall by turning on the light.
1 switch is a piece a decision (not separated), does not connect as the only outlet, or switch. ;-)

Thank you

PostPosted: 03 Dec 2010 3:25 
je ne fais nulle part mention de pc ?
Ma demande concerne juste le raccord des fils de ce monobloc entre eux,afin de ne pas couper le courant de la prise en allumant la lumière.
un monobloc étant 1 interrupteur+1prise ( non séparés),ne se raccorde pas comme seule la prise,ou l'interrupteur. ;-)

Merçi à vous

PostPosted: 03 Dec 2010 5:08 

"a 1 switch is a piece taken (not separated) "
they are not separated because in the same" envelope "(box)

but you still need to be wired separately.

ie three son in 2.5 mm ², which will plug into your socket and just power or another outlet
and two other son-in-1 for light. 5mm ² which will be taken from a light line

Last edited by Guest on 26 Oct 2010 20:57; edited 1 time in total

PostPosted: 03 Dec 2010 7:35 
Good evening,

PC = For information outlet.

Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Electricity All times are GMT + 2 Hours
Page 1 of 1


Similar topics of the

How to connect a switch will and forth twice ?
How to connect a double switch ?
How to connect a switch component ASA ?
How to connect a switch and outlet ?
Can I connect a switch LEGRAND ABB table ?
How to connect single and double switch Debflex ?
How do my electricity ?
Should we do make electricity by a pro ?
How to teach electricity ?
Should I change my electricity meter ?
How to get electricity to my appendix at 100m ?
How to make electricity with brick walls + plaster ?
How to put a switch on a cord ?
How to put an outlet on a switch ?
Is it a 220 V switch compatible ?

Links suggested by Google