Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How to repair a refrigerator absorption ?

A solution has been found How to repair a refrigerator absorption ?

Forum-> Home Appliance Repair
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 04 Dec 2010 5:25 
my fridge consul in absorption, Gas Safety (Gas automatic stop if no flame) that prevents the ignition of the fridge.
Because the fridge light normally triggered when maintenance safety, then, of s'étteind that puts him in position.

dismantled and replaced the system remains déficiant.
I am thinking
incorrect installation or poor electrical connection or heat.

I'm in Haiti and have no access to the repair line in Europe.
thank you for any response (I have more cool it's hot )
Guest





PostPosted: 04 Dec 2010 7:06 
Hello
it may be a thermocouple which keeps the flame lit, can you describe more precisely the system
Thanks in advance
Guest





PostPosted: 04 Dec 2010 9:33 
hello
Replace thermocouple.=)
Guest





PostPosted: 04 Dec 2010 10:06 
Hello, I do not know name but I think that's what you call thermo couple (same security on the water heater) description:
A copper tube from the rounded end and the flame arrives at the distributor or it is connected by a nut on a flange Serag the tube is full of matter.
The flange is in contact with a small brass switch connected son has two electrical connections that will have on the distributor.
Then a mechanism is connected to the button presser. (Containing a small coil end).
I think has a problem of fitting because one of the refrigerator works well but was starting to leak into the circuit ammonia.
J ' I made a couple of the thermal exchange between the two refrigerators.
thank you
Guest





PostPosted: 04 Dec 2010 10:16 
Hello this is exactly


The most common failure is a bad contact between the gas valve and sensor which feeds the heated coil and magnetic closure keeps the gas line open, the voltage is so low it does not take much to trigger a breakdown but at least it's reliable, at least defect whatever the gas is cut off
Guest





PostPosted: 04 Dec 2010 12:06 
Hello, thank you for your comment.
I Demount system and check the mounting direction and connections. When voltage is found on the small coil? I understand that the heat created an electric current which triggers the opening or closing the gas.
I'll keep you updated of the situation.
Thanks
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Home Appliance Repair All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


How to repair my LG refrigerator ?
How to repair my refrigerator does not cool ?
How to repair a refrigerator that was lying ?
How to repair a refrigerator 2 doors down ?
How to repair the lighting of a Liebherr refrigerator ?
How to Repair American refrigerator ice dispenser ?
How to repair my refrigerator cold ARC 4020 ?
How to repair my refrigerator rc2660 heading down ?
How to repair refrigerator that cools more Siera ?
How to repair my refrigerator freezer Gorenje ?
How to repair my refrigerator brand Faure ?
How to repair my refrigerator Samsung SRS 2028C ?
How to repair a leaking refrigerator frost Daewoo ?
How to repair the refrigerator thermostat Ariston MBA 3832C ?
How to repair a refrigerator KG37S22IE/01 Siemens handset ?

Links suggested by Google