Hello, I have a dryer Lavatherm 8040 AEG fan located on the lower right of the camera was making noise..
so I disassembled, cleaned and put a drop of oil. and hop, plus a tremendous noise. except that it is possible to go back in 2 directions: either it pulse of air into the interior of the device, or it pulse of air to the outside of the camera! And naturally distracted me, I forgot which way it was originally installed! CAN YOU HELP ME?
2 nd question: Historically I have found that dryer gave bcp humidity in the room. Strange, since it is a condensation tray. and the humidity is expected to recover transformed into water in the tray and not in the room. course he walks and then fills the bin but when I find it even gives off moisture bcp. Any advice for this? (I could connect the fan mentioned above on the outside?)
the installer who came initially connect the dryer did not have the room to connect it to flow to evacuate the water with sewage.
The water is therefore in the tray. Can I get into a simple transformation to make it play or should I buy?
Hello, For the fan, if installed backwards, you will see the first start, since it not blow through the openings provided for this purpose. In this case, you just have to reverse mounting. Regarding humidity in the room. More exchange of calories in the dryer, the air between hot and cold air is important in the condenser, the better the drying machine and therefore there will be less moisture in the room. The solution is therefore to improve performance by cleaning the channels perfectly. However, the air is not dry air, it is laden with moisture. This moisture in the hot air from the device, condenses on contact with cold surfaces (tile, windows.) Appearing in the form of mist