Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How to size a low slope roof structure ?

Waiting for a better solution How to size a low slope roof structure ?

Forum-> Roof & Attic
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 03 Dec 2010 2:40 
Hello, I plan to cover the participation that I have in front of me, but I have a big concern for slope.

because the patio is 6.5m by 6.5m and I want to recover the existing roof.

The project give a slope of roof is 15%, it will be single plan.

I plan to put on the same tiles on my house has these words Roman tiles lafarge vigils.

For the frame I have a central mid beam travels like a post held by 75/225 of 40 * 40 and a battery chevron to be bolted to the firmness of the house that she is ESPASS 75cm.
acid To review are what this project is reliable or not?

thank you for your reponce !
Guest





PostPosted: 03 Dec 2010 3:56 
Hello,

must know the place where you live, the possibility of snowfall.
The slope is very low, and Roman tiles, it may cause problems.
(note the very bad reputation lafarge tiles, and their inability to recognize their faults.)
Also, if you can, it would be useful to attach a sketch. How to be held on farms, based on what they are, etc..

This will help to calculate sections
Guest





PostPosted: 03 Dec 2010 5:45 
Hello I live has langon (50km south-east of Bordeaux) following the maps I am in zone 1 and at an altitude of 31m.
acid To correct these tiles is trouble! which one?

I think of an idea after they called me these good! the bolts on my chevron my existing roof and top of the batten I WILM + film under my roof tiles and after

for info on the white square in the middle of the plane beam is a post 40 * 40 reinforced concrete.

attached plan and section

http:///www.casimages.com/img.php?i=101027090330116377.jpg

http://www.casimages.com/img.php?i=101027091222182576.
Guest





PostPosted: 03 Dec 2010 6:07 
Hello

What is the height of the roof at the highest and lowest and its length in the direction of slope ?
Guest





PostPosted: 03 Dec 2010 7:16 
the height above the roof will be 2.80 and 1.80 at the low point over a length of 6.60m.

For a map 3d vai I make her and I will follow
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Roof & Attic All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


What minimum slope for a saltbox roof ?
What To my roof ?
Do you think this renovation roof is possible ?
What type of roof is it ?
How headless under a roof ?
How to insulate a roof under TRP ?
How to insulate my roof to live there ?
How to install the roof flashing ?
How to tell if the roof beams are carriers ?
How to edit a section of roof ?
What to use as protection thatched roof ?
The ventilation of the roof is advisable ?
How a plastered chimney roof ?
What section of beam do I need for a roof ?
What roof pitch for an awning ?

Links suggested by Google