Hello, do you have a procedure to avoid being bothered by the flap of paper when you want to paste on the ceiling? Moreover it must be put in the direction of the width of the room or in the direction of length (Exhibit -9 meter by 3.50) In advance thank you.
Hello, Normally the strips facing in the direction of light, to prevent the we see too many connections between them. Doing your part 9m x 3m5o, they must ask in the width direction. Not to be bothered by the length to, during installation, you must fold after gluing. Locate the mileu of the web, then sized up the more than half. Fold the glued on itself halfway. Glue the second half and fold the same way. Take each end and bend them back to the middle. On the is easier to handle. Allow the folded and a few minutes so the glue impreigne the paper well. For installation, fold one half full and submit it to the ceiling. When he is well positioned and pressed, mounted to the brush by insisting on the sides. At about 10cm half, unfold the second half and do the same things. Tip: If you can not keep it to the ceiling, get help by a third person, who can keep up with the brush portion of a brush