Bonjour à tous,

Le site Savoir Tout Faire va fermer le 21 août.

Pour poser vos questions aux membres de la communauté et retrouver plein d'astuces, n'hésitez pas à vous rendre désormais sur, et notamment sur ses forums Bricolage et Auto. Vous y trouverez forcément la réponse à vos questions.

A bientôt !

La Rédaction

Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : How to tile a shower tray for tiling ?

Waiting for a better solution How to tile a shower tray for tiling ?

Forum-> Do It Yourself
Post new topicReply to topic
View previous topic :: View next topic  
Author Message

PostPosted: 01 Dec 2010 23:28 
Good evening, I'm a collector tile with a tile of the tiled, I use glue C2.
Then I put a very thick glue for the tile is level Siphon?
up what thickness? at LM they told me I could go up to 1cm, but I need only 5 mm then its going. but how can I do to stick the tiles do I make a first pass, let it dry and make a second pass with this time the tiles?
may be I can make a paste thick enough for all catch a single pass?
thank you for your advice.

PostPosted: 02 Dec 2010 0:01 

made two passes !

PostPosted: 02 Dec 2010 0:02 
frmu hello, how
drying time between the two passes?

what my appearance must have glue?
thank you

PostPosted: 02 Dec 2010 1:07 

at first sight you take the glue bag which I think is a bad thing when you do not know the dosage was observed.
in this case the glue in bucket is recommended.
your pasty glue should be.
your drying time, you have to see when it is dry but if you have 5 mm glue wait at least 48 h

by cons before you start your tiles and earthenware, it is mandatory to pass on the walls and floor sealant and the sealing strips on all angles.

if not done in 2 years you again in full what you are doing...
4: Hello, I have to apply a primer to drive the receiver to be sure it adheres well?
should I reapply between the two layers?

for the first layer should I use a comb glue? What model? or a knife then simply coat?
thank you

PostPosted: 02 Dec 2010 1:49 
bonjour, dois je appliquer un primaire d'accrochage dur le receveur pour etre sur que cela adhere bien ?
dois je en reappliquer entre les deux couches?
pour la premiere couche dois je utiliser un peigne a colle? quel model?ou alors un couteau a enduire tout simple?

PostPosted: 02 Dec 2010 2:34 
not if your primary need is glue made for a Receiver has

tile adhesive should be your glue called "flex" if it's good to do again in a year

respect to the first layer is more smooth and less bother you then
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Do It Yourself All times are GMT + 2 Hours
Page 1 of 1


Similar topics of the

Links suggested by Google