Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : What does error e22 on LL Arthur Martin AW2147s ?

A solution has been found What does error e22 on LL Arthur Martin AW2147s ?

Forum-> Home Appliance Repair
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 01 Dec 2010 6:11 
Good evening,
despite much research I can not find what does the error code e22 once I got into the operator menu.


symptom occurs when dry, about 2 minutes after startup, the machine goes into code e10 or e20. I happen to run it slightly by removing the drain filter.

For washing, everything works perfectly.


Thanks for your help
Guest





PostPosted: 01 Dec 2010 7:09 
HELLO
code e22 is not listed:
Check these points: Losses the filter drain, rinse with water.
The drain pump is clogged.
siphon installation is clogged, the drain hose is clogged or kinked.
The water tap to check, if it flows well voyer, or cut the water system.
The height of the hose is too high (up to 1 meter).
Regards Jean-Paul
Guest





PostPosted: 01 Dec 2010 8:29 
Hello, thank you John Paul
for your message, the drain filter is clean, but the pump may be clogged?? What seems strange is that the problem occurs at drying the washing works perfectly.

The trap is 80cm, the hose does not seem blocked, or bent, I check just now.

The valve is ok.

I'm making a check-up this morning and I'll show you my comments in the day
Guest





PostPosted: 01 Dec 2010 9:15 
Cette réponse a aidé l'auteur du sujet.
hello,

E22 is a "difficulty drain during drying or drying dirty condenser or closed switch anti boil on full "

voila certainly do a good cleaning !!!
Guest





PostPosted: 01 Dec 2010 10:49 
the Southern Hello and thank you for your answer, but what part
should I clean first??

J ' I expected to find on the net that there were two sump pumps?? I read diagonally??

Thanks for your answers
Guest





PostPosted: 01 Dec 2010 12:39 
Cette réponse a aidé l'auteur du sujet.
yes indeed, you read diagonally. Lol. you have a sump pump and a pump circulating water during drying, this is not quite the same. So you have your condenser is on the left beyond the top machine. this one is with a hose that goes under your resistance. and I think that's condenser was clogged. clean and it should start !!!
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Home Appliance Repair All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


How to program the card LL Arthur Martin AW2147S ?
How to fix E90 error on washer arthur martin ?
Why an error code E90 on LL Arthur Martin ?
Why a Code 30 error on LV Martin Arthur ASF6160 ?
How to repair my oven arthur martin ?
How to Repair the fault of my oven Arthur Martin ?
How to repair a dishwasher Arthur Martin Electrolux ?
How to repair the dishwasher asf arthur martin 6140 ?
How to repair my washing machine AW2146F Arthur Martin ?
How to repair my washing machine Arthur Martin AWF 1410 ?
Why is my SL Arthur Martin does not heat up enough ?
Why does my LL Arthur Martin spin more ?
Why does my LV Martin Arthur ASF2650 not dry ?
Why my LL Arthur Martin awf1410 stop there ?
Why this failure on LV Arthur Martin asl453 ?

Links suggested by Google