Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : What problem on my drive Legrand Céliane 600W ?

A solution has been found What problem on my drive Legrand Céliane 600W ?

Forum-> Electricity
Post new topicReply to topic
View previous topic :: View next topic  
Author Message

PostPosted: 01 Dec 2010 5:59 

I arrive after my total renovation.
I test my various electrical circuits before calling the consuel.
Every time I got a surprise today by putting 1 of my circuits "Halogen Spot" in service.
Indeed, it is controlled by a dimmer Legrand Celiane 600W (670 Ref. 82) and pushbutton switch.
By this circuit into operation on 6 Halogen (50W x 6), these vary from themselves without touching the command continuously (0V to 220V). No order can stop it or do anything.
I took several people to check my wiring diagram given by Legrand, and unless I am mistaken it is correct.
I replace the drive (I have one second), even variation.j 'Then I replaced poussoir.idem.
I plugged only drive (without the button), nothing happens.
I left the drive and left free wired the switch, I have the same problem of variation.
Ci the link below the diagram of inverter:

Someone one could help me please? Or "help me"?
I thank you in advance

PostPosted: 01 Dec 2010 7:21 
Good evening,
Try plugging the drive, a single lamp to see what it looks

PostPosted: 01 Dec 2010 8:58 

to read your problem, I assume that you have spots 50 W 12 V transformer and your are not compatible with your drive.

you have probably the electrical transformer.

change the tranfos by electronic or change your spots for the 220 V 50 W...
3: goodnight

your drive Is it suitable for halogen ?

PostPosted: 01 Dec 2010 9:45 

votre variateur est-il adapt pour des halognes ?

PostPosted: 01 Dec 2010 11:42 
Good evening,

Yes forgive me, I forgot to mention this important detail:
My spots are 220V, no transformer 12V circuit that

PostPosted: 01 Dec 2010 13:54 
LSD Yes, the drive is suitable for Halogens (Max 600VA).

It can also operate on 12V to (Transfo )

PostPosted: 01 Dec 2010 14:20 
Cette réponse a aidé l'auteur du sujet.
Good evening,

check if the control wire to the BP well insulated by rapprt ohmmeter to phase, if there is any leakage, it will not work

PostPosted: 01 Dec 2010 15:18 
this is no longer a need but an ohmmeter megohmmeter!
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Electricity All times are GMT + 2 Hours
Page 1 of 1


Similar topics of the

Can I connect a switch LEGRAND ABB table ?
How do my electricity ?
Should we do make electricity by a pro ?
How to teach electricity ?
Should I change my electricity meter ?
How to get electricity to my appendix at 100m ?
How to make electricity with brick walls + plaster ?
How to drive a CMV with 2 switches ?
How to solve a problem of resistance ?
How to solve this problem breaker ?
How to solve my problem of electrical outlets ?
Why this problem Connector Automatic day / night ?
How to solve my problem of electrical panel ?
Why does my drive not reading and not serious plus CDs ?
How to recognize my 2nd SATA drive ?

Links suggested by Google