Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : Why does my dryer Acova towel does not heat up ?

Waiting for a better solution Why does my dryer Acova towel does not heat up ?

Forum-> Electricity
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 02 Dec 2010 2:20 
Hello everyone,

description of my problem on TSL ACOVA 075-050 -
the box has 2 LEDs (on/off ) + forced march
plusbien heard a thermostat.
test position "on the LED lights + start of the forced march.

If I click on a forced march she began to blink as usual.
If I turn the thermostat to cold led to forced march off. Inverts if I go to the Hot j'entent a click is good LED from turning on.
So I opened the box and then I unplug the resistance is 0.71 Ohm test it shows if I am the 2000 ohm and function I'm rocking on it gives me 2000K 0.00 Ohm.

What happens? can you help me find the part deffective?

Thanks for your help
Guest





PostPosted: 02 Dec 2010 4:08 
Hello,

If you are getting 0.71 on 2000 ohm position that seems high resistance is HS you should find between 0.025 and 0.040 depending on the power of your furnace
Guest





PostPosted: 02 Dec 2010 5:45 
Cette réponse a aidé l'auteur du sujet.
Hello
You should measure 70 ohms , set the size of the meter to 100 ohms
Guest





PostPosted: 02 Dec 2010 7:58 
Following your message, I changed my position multimeter.
So I switched my selector out of 200 Ohm because I did not 100 ohm.
The result is constant at 70.6 ohms.
So what does this mean ?
Guest





PostPosted: 02 Dec 2010 10:15 
Hello
The réistance good

You have a problem on the electronic card
Measure the relay terminals on 2 correspondeut that the coil you need to find a value prioritize between 50 and 200 ohms (usually around 100 ohms)
If you find them, the problem is probably on the map
Guest





PostPosted: 02 Dec 2010 10:39 
Good evening,
How to recognize a relay, I do not see a coil.
On the map there are different element there are two "big" cube with a yellow Koneks ref-275v x2 and orange with 16 A/250V tyco brand.

Ps: if I took pictures need!
thank you
Guest





PostPosted: 02 Dec 2010 10:49 
Hello,

orange elongated, relay
The terminals of the coil are at one end of the relay
Guest





PostPosted: 02 Dec 2010 11:09 
Hello,

Try on 2000 and any chance on 20000
if you find nothing is over
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Electricity All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


Why does my dryer is electric towel HS ?
Why is my towel dryer no longer works ?
Why have 6 Towel son ?
How do my electricity ?
How to connect a dry towel mixed ?
Should we do make electricity by a pro ?
How to teach electricity ?
Should I change my electricity meter ?
How to get electricity to my appendix at 100m ?
How to make electricity with brick walls + plaster ?
How to move from 380 to 220 since the heat pump ?
What section to use to heat my greenhouse ?
My hot water tank to heat up ?
Where is the resistance of a dryer Brandt first ?
How to repair a resistance of a hair dryer ?

Links suggested by Google