Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : Why does my dryer Faure fte 280 does not dry well ?

Waiting for a better solution Why does my dryer Faure fte 280 does not dry well ?

Forum-> Home Appliance Repair
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 02 Dec 2010 22:55 
Hello
I have a tumble dryer brand faure for a little over a year and a few days ago I had a problem, it stops as if the cycle was finished but the laundry is not quite dry and sometimes it runs a while then stops and the lights full tank and filter are full on, I raise and he leaves.
In the end I stimulus 3 times for laundry to dry.
Have you an idea of the problem?
thank you in advance
Guest





PostPosted: 03 Dec 2010 0:03 
HELLO

Under this device is a tray, you must empty it must be almost full, the security, which is installed on your appareil.Cordialement Jean-Paul
Guest





PostPosted: 03 Dec 2010 1:42 
hello, then the full bin is talking about is the condenser jeanpaul27500.. this is not a tank but good. it must be cleaned regularly.. Then make sure the pipe part (of the lift pump) at the bottom and back up your tank is not obstructed by "fluff" of laundry. This would explain why seeing the tank full
Guest





PostPosted: 03 Dec 2010 4:00 
hello
so I look good, the bin in question or the pump is located casi vacuum pump works, the float too, so I do not understand why these lights on but not all the time.
cons by the laundry is never completely dry.
thank you
Guest





PostPosted: 03 Dec 2010 6:04 
HELLO
CONTINUED:
rumen clean your filters, so that the condenser of it, obstruction is possible which generates this problem.
Regards Jean-Paul
Guest





PostPosted: 03 Dec 2010 7:15 
what is the engine that is down to your clothes dryer runs well ???
Guest





PostPosted: 03 Dec 2010 8:16 
hello all
I disassembled, cleaned and all the same.
even if the sensor hydro foo stuff that is used to calculate the rate of moisture
thank you
Guest





PostPosted: 03 Dec 2010 8:17 
hello
so the turbine runs well, I do not see anything wrong!
j ' I sécuritée shunts the door to operate the door open and warm air arrives well but the flow is not well
great, it's normal ?
Guest





PostPosted: 03 Dec 2010 9:50 
Have you checked your strength.? it al behind your dryer.. see if all the springs of the resistance are in place. because it can operate only half !
Guest





PostPosted: 03 Dec 2010 11:01 
hello, the resistors are ok
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Home Appliance Repair All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


Why does my dryer Faure LSK 170 does not heat up ?
How to troubleshoot my dryer Faure LSK 398 ?
How to revive my dryer Faure GTF 280 in security ?
What does the error code on dryer EHO Faure ?
How to repair faure 563 lvs ?
Where to find websites on the appliance ?
How to repair my washing machine Faure FWF 395 ?
How to repair my refrigerator brand Faure ?
How to repair my washing machine Faure ?
How to repair washing machine FAURE Maxim A Plus ?
How to repair my washing machine Faure LFV860 ?
How to repair a motor freezer Faure 2006 ?
How to repair HVAC faure 6996W vitro with 2 HS right ?
How to repair my dryer ?
How to repair my dryer ?

Links suggested by Google