Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : Why does my washing machine fills up, turns and stops ?

Waiting for a better solution Why does my washing machine fills up, turns and stops ?

Forum-> Home Appliance Repair
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 05 Dec 2010 12:37 
Hello my washing machine (bluesky blf 1449) fills, spins, not heating and it s edge. I seek and not find the strength is good
Guest





PostPosted: 05 Dec 2010 14:13 
hello, is what happened to the 220 V resistance, because it looks like an electronic card problem. thus check !!
Guest





PostPosted: 05 Dec 2010 15:20 
Hello J as if he had had the 220v resistance there s nothing or should he look now? thank you m have already answered
Guest





PostPosted: 05 Dec 2010 15:49 
HELLO
Your strength is not powered, check the wiring, cut the son against the door, the electronic card can be questioned, checked the pressostat.Cordialement Jean-Paul
Guest





PostPosted: 05 Dec 2010 17:09 
we must look at the map if it didn't electronic components that have scorched !!!
Guest





PostPosted: 05 Dec 2010 17:47 
Hello J I switch everything looks ok na electronic map nothing abnormal (visible) may be the programmer I can not test it so thank you but I think I'll leave
Guest





PostPosted: 05 Dec 2010 18:46 
GOOD EVENING

You're known as the 230 volts is present on the resistance, this does not tell you it is out of order, you plug this resistance line and you'll be set, or with your OHM meter gauge put on 200ohm and check the strength you need to find a resistance between 15 and 30 OHMS.Cordialement Jean-Paul
Guest





PostPosted: 05 Dec 2010 21:10 
hello

Michel said

j s have measure there was a resistance 220v

there s nothing.

The fault does is it not elsewhere?

as has been said, wiring, and electronic card
Guest





PostPosted: 05 Dec 2010 22:40 
Hello resistance is 7.25 ohms so it must be in good condition of the wiring has nothing abnormal ?
Guest





PostPosted: 06 Dec 2010 0:30 
HELLO

The problem is on the electronic board, see the relay, solder, again if this is necessary, check if you have not a trace of burnt on carte.Cordialement Jean-Paul
Guest





PostPosted: 06 Dec 2010 2:25 
thank you for reading what has already been written and proposed

Southern fried, Posted: October 8, 2010 8-32

should look at the map if it didn't electronic components that have scorched!


michel018, Posted: October 12, 2010 13-16
Hello J everything looks ok the switch e-card na nothing abnormal (visible)
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Home Appliance Repair All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


Why does my washing machine fills up Faure ?
Why does my washing machine fills up all the time ?
Why does my washing machine fills Far-it water ?
Why does my washing machine makes a noise as it fills ?
Why does my washing machine turns ... Dry ?
Why does my washing machine turns than does drain ?
Why does my washing machine turns on Faure endtime ?
Why al ariston washing machine t en 1256 no longer turns ?
Why does my washing machine turns on wfh1277f Brandt asked ?
Why washing machine arthur martin AW 2092 no longer turns ?
Why drum washing machine Fagor LD2100 no longer turns ?
Why does my washing machine stops ?
Why does my washing machine stops ?
Why does my washing machine stops during cycle ?
Why does my washing machine stops during the program ?

Links suggested by Google