Hello, My washing machine fills but does not rotate. Therefore, the filling continues and therefore leakage occurs through the door because of the overflow. I cleaned and tested the compression chamber, tested the pressure switch, solenoid, everything is good. How information stop filling and begin the rotation of the drum is it distributed to different mechanisms?. Which body seems to be faulty? Thank Chris9
My washing machine is BLUESY BLF 1260. I checked the compression chamber. When I breathe into the triggering of the switch is done. Similarly, the contact high pressure switch has been checked by blowing the ohmmeter, the contact is established. I wanted to test it on, to see if filling the tank triggered High contact pressure switch but I was wondering whether to place an ammeter to the output to detect an electrical signal (if so what size?). Thanks for your help
Hello if you have tested the unit as you said now tried to fill the drum nearly full and you cut it.
you unplug the switch and you tested again with the water inside the drum. especially do not remove the pump pressure switch pressostat.si there is no contact c that there is a problem of compression of the chamber. and if there is contact c is rather at the "programmer". good luck
hello, you say you have checked the pressure but you do not talk about the pressure switch hose. and he would check it. because it would be cracked as you pointed out that this does not surprise me Lachignole not !!!