Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : Why doesn't the bobbin thread go back more ?

Waiting for a better solution Why doesn't the bobbin thread go back more ?

Forum-> Sewing
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 02 Dec 2010 9:12 
Hello, I am unable to raise the bobbin thread my machine, singer 760, I removed (well what I have) to clean, I changed the needle but nothing ' there is, is that someone could help me before going to SAV Singer Thanks
Guest





PostPosted: 02 Dec 2010 9:49 
Good evening
First check:

_The position of the needle: the rounded side should face you.
_The position rotary hook: when the needle is in the lowest position the hook point must be located next to the needle
_The height Needle bar: when the needle bar is in the down position the two small horizontal marks etched on the needle bar should coincide with the carcass of the machine (open the small cover located to the left of the machine)
Good luck
!
Guest





PostPosted: 02 Dec 2010 10:13 
Good evening vivianedu45

Sorry for Geo, but I'll be a little more specific.

Indeed the needle. must be positioned flat on the back, and thrust upward.

To check if the hook is disturbed, you must set the needle to zero zigzag center the needle plate. Needle down to the lowest point and continue to turn the steering wheel so that the needle goes back 2mm;

1_ at that time the hook point must be find the axis of the needle. To check the needle plate removed.

2_Dans this position the eye of the needle should be about 1.5-2mm below the tip of the hook.

If the first control is not good your hook is disturbed
If the latter is the needle bar is wanton.

For settings +
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Sewing All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


How to thread the bobbin from the Bluebell ?
Why the bobbin thread is it no longer made ?
Why is my sewing machine does not thread ?
Why is the thread breaks on my sewing machine ?
How to up the lower thread of a sewing machine ?
Why is my Singer sewing machine 257 rewinds the thread ?
How sewing with elastic thread machine (Pickling) ?
How to thread the needle on a Singer sewing machine pen ?
Why is my reel lower thread does not thread ?
What needle and bobbin what does it take ?
How can we raise the bobbin case ?
How to do a bobbin on Futura 2000 ?
How to set the hook on the stall bobbin ?
How to put a block bobbin lervia KH 4000 ?
Where to find foot cord with bobbin and Meister 44: Why does

Links suggested by Google