Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : Why fuse blows by plugging my comings and goings ?

A solution has been found Why fuse blows by plugging my comings and goings ?

Forum-> Electricity
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 01 Dec 2010 15:09 
Hello, I want
get help for connecting a back and forth.
I tried to open up to this message subject but I have not found one that matches my problem.
Let me explain:
Enabling a back and forth, the fuse has blown. I changed the fuse and when I tried to reset the light, the fuse had blown again.
that comes and goes is placed above a double back and forth, and another back and forth is placed in the same room.
wholesale these switches work together on the same fuse
So I disassembled the switch and delivered the juice and lights were working, except of course that enabled by the coming and going.

I bought a new switch because the former seemed sick, they could not lower the switch, only the mount.
When I wanted to reconnect (I spotted the connections before removing) no way that this works, the fuse blows all the time.
I have 2 son
phase to connect, one that comes from the double bottom back and forth and coming down the wall.



Thanks for your help in this connection, I tried all sorts of connections and burnt two dozen fuse !!
Guest





PostPosted: 01 Dec 2010 15:58 
Good evening,

In the wiki
in the electricity section there is an article on making a back and forth with the scheme.

Watch it and tell us the difference to your connection.

If possible a photo would be welcome because you are talking about two phases and a reciprocating arm is not a phase.

If it jumps immediately by pressing a switch is that it operates a short-circuit.

acid To +
Guest





PostPosted: 01 Dec 2010 17:25 
Hello,

here's a tutorial to post photos: http
://www.savoirtoutfaire.com/wiki/Poster_une_photo_sur_le_forum.html

And here's the wiki article on:

http://www.savoirtoutfaire.com/wiki/Installer_un_va-et-vient.html

Enjoy
Guest





PostPosted: 01 Dec 2010 17:44 
Guest





PostPosted: 01 Dec 2010 18:55 
yes I have a multimeter, I do that is to see if my fuses are burnt or not !!
Guest





PostPosted: 01 Dec 2010 19:00 
I 211 o...
6: paroroma and of course also
Guest





PostPosted: 01 Dec 2010 20:34 
et paroroma bien sur aussi...
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Electricity All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


Why does my comings and goings do they not ?
Why does my fuse blows ?
Why a fuse blows my lift ?
How do my electricity ?
How to teach electricity ?
Should we do make electricity by a pro ?
Should I change my electricity meter ?
How to get electricity to my appendix at 100m ?
How to make electricity with brick walls + plaster ?
Why does everything an electrical fuse ?
Finding the fuse for my boiler ?
How to change sockets with fuse ?
Why does my Indesit cooker grill off the fuse ?
Why fuse tranfo 12V (pendant lighting) jumps ?

Links suggested by Google