I know the worry has been exposed several times on the forum and on the other, but I do not understand the answers.
I have a washing machine heading EG7205 (opens up).
After noting that during the spin, the machine seemed to turn ds vacuum or spin anything, I decided to open my machine. I see after half hour of observation that the belt is no longer in place. So after half an hour, I do not tinker, let alone appliances, I am virtually nil.
I replace the belt on the big stuff cylindrical (after an hour of struggle, of course), and repeats a similar essai.toujours belt goes to the top of the cylindrical tip.
I look on different forum, I learn that there may be a misalignment between two things. Another story of a rolling ball.
Could someone help me by telling me just what I must do? The trick cylindrical and the other thing connected with below the belt appears to be well focused.
I got this machine and I've used it twice, so I can not say if there was change in noise or other.
I'm no expert at all forgive my simple spa, which is why I am because when I read the responses on the forum that does not m Flash no.?
Your motor is mounted on the frame of your device. IF you unscrew the screw bracket, you can shift the engine and align with the pulley drum. It is a necessity for that belt stays in place. Another necessity is its tension. Make sure it is properly hung