Bonjour à tous,

Le site Savoir Tout Faire va fermer le 21 août.

Pour poser vos questions aux membres de la communauté et retrouver plein d'astuces, n'hésitez pas à vous rendre désormais sur, et notamment sur ses forums Bricolage et Auto. Vous y trouverez forcément la réponse à vos questions.

A bientôt !

La Rédaction

Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : Why Janome 744D serger knife does not cut ?

A solution has been found Why Janome 744D serger knife does not cut ?

Forum-> Sewing
Post new topicReply to topic
View previous topic :: View next topic  
Author Message

PostPosted: 05 Dec 2010 13:42 
when I do a hem with my serger knife does not cut the piece of fabric that is too much? Yet I read the manual 3 times already ?

PostPosted: 05 Dec 2010 15:32 
Hello astrochien

Your problem may be due to wear knives.

You can sharpen your own knives, if you have a drum (wheel) particularly the knife from the top, you take the worn part by reducing it to its length but not on the thickness. Whilst maintaining the angle on the width and angle across the thickness.
You can not sharpen a knife bottom one is special carbide wheel then. But the wear is very low, it can be used any longer?
If not see this site to order.
Http:// php? subid = 143 & PHPSESSID = & offset = 3 ufoq4nt1pbqi4eitnbklj2j1r4


PostPosted: 05 Dec 2010 16:08 
I do not think the knife is used because it is a new machine? the problem is that I do not quite understand the instructions to place the knife securely to cut

PostPosted: 05 Dec 2010 16:24 
Hello astrochien

The upper cutter shall be supported on the lower knife, cutting edges should intersect one mm.
The lower knife should not exceed the needle plate.

The upper blade is adjustable in height by its screw.
A + if problem.

PostPosted: 05 Dec 2010 17:16 
thank you very much for your message it has really helped out

PostPosted: 05 Dec 2010 19:46 
that's it, I solved the problem:
lower knife was not against the upper knife (badly screwed).
thank you again for helping me out
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Sewing All times are GMT + 2 Hours
Page 1 of 1


Similar topics of the

Where to find manual sewing machine Janome QC 6019 ?
Where to find a manual sewing machine Janome JS 1008 ?
What is the difference between a sewing machine and serger ?
Where to find the user manual of a Janome 415 in French ?
How to use my serger ?
How to choose a serger ?
Where to find a used serger ?
Does he need ongoing before using a serger ?
Why does my serger overlock Victoria more ?
Where to find documentation serger ?
Finding needles serger ?
Where to find knives Pickling serger ?
How to change the needle on my Singer serger ?
Where to find the manual for my serger Pickling 734 ?
Where can I find the instruction in the French serger ML-3: W

Links suggested by Google