Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
HowToDo Question : Why resistance of the SL does not heat up fully ?
Posted: 02 Dec 2010 5:04
I just changed the strength of my dryer FAR S1562 that warmed over. (Not resettable cutout) Is it normal that all the "springs" not "red" no? Thanks for your answers
Posted: 02 Dec 2010 5:31
Cette réponse a aidé l'auteur du sujet.
Hello, yes it is more or less normal following the program chosen !!
Posted: 02 Dec 2010 8:01
Many thanks for your answer! good day
Posted: 02 Dec 2010 9:56
is well I thought, this is not normal that the "springs" are not ashamed entirely. Even after changing the resistance, my dryer stopped heating completely even after a long cycle of 150 min. my machine is not even dry.. What should we check the other? Is what it may come from the new resistance that may be defective? Thanks for your answers
Posted: 02 Dec 2010 11:33
Not that all resistance does not heat, is not necessarily abnormal. The origin of the problem may be elsewhere. Make sure the drum dryer, runs for his running
Posted: 02 Dec 2010 13:11
Yes it runs quite normally. I do not understand
Posted: 02 Dec 2010 14:53
Please excuse me, but have you seen first hand the rotation rather than noise? If so: First, clean the entire ventilation system, the drum output to the gills with air.
Posted: 02 Dec 2010 17:03
Yes I have seen first hand because we removed the cover on the back of the SL in order to change the resistance. We started the SL and that's how we found that the "springs" of the resistance does not blush all. Apparently everything works properly.
Is this may be the resistance that is defective? Good evening to you too
Posted: 02 Dec 2010 18:51
Hi Caroline, the test result of resistance with a multimeter. You can find them in supermarkets at a price of 25 in radius EGÃ©nÃ©rallement automobileRÃ©glez dial to Ohms (turn on progressively larger value) if the numbers do not appear but LO or L, is that resistance is infinite therefore replace
All times are GMT + 2 Hours