Do you need help? Post your question on the forum, there will always be a member to help you and give some advice. Ask a new question
Contribute, 36 messages are still unanswered
HowToDo Question : Why then F6/FB F3 fault on LV Whirlpool ADP6830 ?

Waiting for a better solution Why then F6/FB F3 fault on LV Whirlpool ADP6830 ?

Forum-> Home Appliance Repair
Post new topicReply to topic
View previous topic :: View next topic  
Author Message
Guest





PostPosted: 30 Nov 2010 21:27 
Hello. F3 on my first LV failure. I changed the resistor. It's good but failure F6 or Fb appears. I reversed: solenoid pump recuclage, OWI probe the presence of water valve micromotor Powered through the arms. All with a 2nd unit identical. Balance of the races: the first walk again (with water leak to be resolved). The second is now stalled on the program 'Soak. "No water. I traded again all elements with the first. Same thing: the first step again and the second yet. No error message but the light flashes per set of departure 6.
Thanks for your help
Guest





PostPosted: 30 Nov 2010 23:21 
hello

F3-circuit heater. Check resistance, wiring, electronic card and failing

F6 No water entering the unit. Check valve , water inlet pipe, valve and
Guest





PostPosted: 01 Dec 2010 1:49 
IDS Thanks, I've already done all this. See detailed text of my question.
Looking another voice, perhaps the circuit board
Guest





PostPosted: 01 Dec 2010 3:21 
HELLO
After several attempts your phone does not work, actually the code 3 is resistance heating, So you replaced it, this problem is solved.
F6 = no water ingress into the camera: check, water faucet, the hose to reach water the fill valve.
FB = Dispatcher water HS: The system for detecting water in the lower and upper arm is defective: check the wiring, the micro-motor, contact positioning, and perforated disc if the offending card électronique.Cordialement Jean-Paul
Guest





PostPosted: 01 Dec 2010 5:19 
More and added:
fault codes stored in the device memory its erasable support extended by 5 seconds on the start button break. The device can then restart the cycle normalement.Cordialement Jean-Paul
Guest





PostPosted: 01 Dec 2010 5:37 
Thanks for your help. But I spend too much time. I will take this problem later
Guest





PostPosted: 01 Dec 2010 6:45 
hello

you say
"The second is now stuck on the program 'Soak. "WATER CAN NOT. I traded again all elements with the first. Same thing: the first step again and the second yet. No message error but the LED blinks in series starting from 6. "

6 flashes:
No water entering the unit. Check valve, water inlet pipe, valve and
Display posts from previous:   
Post new topicReply to topic    HowToDo Forum Index -> Home Appliance Repair All times are GMT + 2 Hours
Page 1 of 1




 

Similar topics of the


How to repair a fault LV Whirlpool ADP 4580 ?
Why PF and FH Fault on LL Whirlpool AWM 7129 ?
What is the fault F2 on an LV Whirlpool 6th sense ?
What to do with a display fault F4 LV Whirlpool ?
How to solve the fault of my LV Whirlpool ADG8442 ?
What to do with Whirlpool washing machine fault code FA 11 ?
How to repair a fault on my LV program ?
How to repair a fault on tassimo ?
How to repair F06 fault on Bauknecht washing machine ?
How to Repair the fault of my oven Arthur Martin ?
Where to find websites on the appliance ?
How to repair my Whirlpool Hob ?
How to repair my Whirlpool LL awo 5631 ?
How to repair my Whirlpool dishwasher ?
How to repair the leak on LV Whirlpool ADG 8440 ?

Links suggested by Google